PSSYB-199
Swift Water Rescue Shoes
＄ 31.00
The PSSYB-199 Swift Water Rescue Shoes are built for fast-tempo water operations—short on/off-vessel cycles, dockside tasks, and shallow-water wading—where 3–5 s don/doff, visibility, and grip matter. A front zipper with a hook-and-loop storm cover supports glove-friendly entry and secure ankle lockdown. The platform balances light weight (≈1.1–1.3 kg/pair) with the protection and traction performance rescue teams need for repeated boat-to-shore movements.
Speed and conspicuity drive the design. A front zipper delivers immediate entry/exit; the hook-and-loop cover adds ankle support and shields the zipper from accidental opening during loadouts and redeployments. To aid crew detection through rain, spray, and low light, the cover and lateral quarters integrate retroreflective panels made from ANSI/ISEA 107-compliant tape (material-level), improving multi-angle visibility.
The upper combines abrasion-resistant synthetic leather with high-tenacity nylon, providing structure where you need it and flex where you want it. TPU/rubber overlays at the toe and sidewalls defend against cleats, ladder rungs, and shoreline debris. Inside, a quick-dry mesh lining works with medial drain ports to speed water egress and reduce dry-out time. A removable, perforated EVA insole manages underfoot moisture while maintaining cushion over long shifts. Corrosion-resistant hardware withstands brackish and marine environments.
Underfoot, a rubber outsole tuned for wet traction uses multi-depth wave lugs and transverse drainage channels to maintain contact on slick ceramic/steel analogs and natural substrates. Slip performance has been tested to EN ISO 13287 and achieved SRC-level results in internal testing (not certified). Flex durability is validated to ≥50,000 cycles (EN ISO 20344 / SATRA TM92). A protective layer provides puncture resistance ≥1.1–1.5 kN per EN ISO 20344 with a 4.5 mm probe, helping shield feet from submerged hazards. The mid-cut profile supports agile stepping across mixed terrain without excess bulk.
Rapid Closure – Front zipper + hook-and-loop cover enable 3–5 s don/doff with gloved hands and secure ankle support.
High Visibility – ANSI/ISEA 107-compliant reflective tape (material-level) improves low-light detection around vessels and banks.
Marine-Tuned Traction – Rubber outsole with multi-depth lugs and drainage channels; EN ISO 13287 slip test with SRC-level internal results.
Targeted Protection – TPU/rubber toe and side overlays resist scuffs and localized impacts near cleats and rungs.
Drainage & Dry-Out – Medial drain ports + quick-dry mesh lining accelerate water egress and drying.
Light, Durable Platform – ≈1.1–1.3 kg/pair; ≥50,000 flex cycles; puncture ≥1.1–1.5 kN (EN ISO 20344, 4.5 mm probe).
Service-Ready Details – Removable perforated EVA insole, corrosion-resistant hardware, glove-friendly pullers.
Short-cycle swift-water rescue with frequent vessel boarding, dockside work, and shallow-water wading.
Urban/WUI search & recovery across ramps, piers, spillways, and rocky riverbeds.
Marina and industrial waterfront operations requiring rapid transitions and wet-surface traction.
Water behavior and fit: The medial drain ports allow water to pass through and drain from the shoes. Choose the rest of the protective ensemble for water temperature and any contamination hazard. Check fit with the socks or dry-suit socks to be worn, and assess closure retention and footing on the expected surfaces.
For OEM or bulk orders: Send the PSSYB-199 model reference, quantities by size, foot length and width, the sock combination, intended water and surface conditions, destination market, and required test documentation. Include any impact-rated toecap requirement in the specification. Request a PSSYB-199 quote with these details.
| Specification | Requirement / Result | Method / Note |
| Closure system | Front zipper + hook-and-loop storm cover; 3–5 s don/doff | Glove-compatible design |
| Upper materials | Synthetic leather + high-tenacity nylon | Abrasion-resistant |
| Lining | Quick-dry mesh | Breathable; medial drain ports |
| Insole | Removable perforated EVA | Moisture management |
| Toe/side protection | TPU/rubber overlays | Impact & scuff protection |
| Outsole | Rubber; multi-depth lugs + transverse channels | Water shedding for wet surfaces |
| Slip resistance | EN ISO 13287 tested; SRC-level internal result | Wet on ceramic & steel; ASTM F2913 on request |
| Puncture resistance | ≥1.1–1.5 kN | EN ISO 20344 (4.5 mm probe) |
| Flex durability | ≥50,000 cycles; no failure | EN ISO 20344 / SATRA TM92 |
| Visibility | ANSI/ISEA 107-compliant reflective tape (material-level) | Zipper cover + lateral panels |
| Weight (pair) | ≈1.1–1.3 kg | Size-dependent |
| Sizing | Unisex EU/US; half sizes on request | Wide fit available on request |
- Intended use: Swift-water rescue footwear for short-cycle operations; not for structural firefighting or high-heat exposure.
- Test references: Slip tested per EN ISO 13287 with reported SRC-level internal results; puncture tested per EN ISO 20344 using a 4.5 mm probe. The existing design reference is GA 628-2013.
- U.S. testing option: ASTM F2913 slip testing is available on request. Compare results using the specified test surface, contaminant, contact mode, and footwear configuration.
- Certification status: Not certified. Third-party testing programs can be supported for a project; method testing does not automatically establish certification or equivalence to a complete protective-footwear standard.
Compare Water-Rescue and Firefighting Footwear
PSSWH-109
- NFPA 1952 Design Reference
- Neoprene Liner & Insole
- Outsole Puncture ≥1.9 kN
- Hook-and-Loop Closure
PSSJW-110
- Fit 3–5s
- Slip Angle ≥25°
- Puncture ≥1.9kN
PSSFB-141B
- Leather Structural Fire Boots
- Aluminum Toecap
- Composite Midsole
- 340 mm (13.4 in) Height
PSLKL-187
- Wildland Boot Design
- 8–10 in Shaft
- 1.9–2.3 kg per Pair
- Steel Toe Optional